DESCRIPTION: Temperature range -110 °F to 1050 °F and pressures to 100,000 psi. Inert to water, Oil Alkalies and many acids. Will not attract dust. Excellent anti-seize properties on steel bolts in super-heated steam installations after exposure to 1050°F and 20% salt solutions. Industry uses: Oil and Gas, Non-destructive testing (NDT), pipe storage, foundries, automotive, sewing trades, paper converting, chemical plants, textile fibers, woodworking. Contains pure molybdenum disulfide for superior lubrication where oil is not desirable.
DIRECTIONS: Shake vigorously. Surface must be clean and dry prior to application. Spray from a distance of 8 to 10 inches. Apply a thin, uniform coating. Allow to set approximately 3 to 5 minutes before applying a second coat. After each use, invert can and use a short spray to clear button.
FIRST AID PROCEDURES: EYE: Immediately flush with cool water. Remove contact lenses if applicable, and continue flushing for 15 minutes. Obtain medical attention immediately. SKIN: Flush with cool water. Wash with soap and water obtain medical attention if irritation persists. INHALATION: If symptoms develop, move victim to fresh air. If symptoms persist, obtain medical attention. If breathing has stopped, Trained personal should administer CPR immediately. INGESTION: Do not induce vomiting. Never give CPR by mouth if victim is unconscious, or is convulsing. Obtain medical attention.
CONTAINS: (CAS No.) Methylene Chloride (75-09-2) Toluene (108-88-3) Isopropyl alcohol (67-63-0) and Liquefied Petroleum Gas (68476-86-8)
KEEP OUT OF REACH OF CHILDREN FOR PROFESSIONAL USE ONLY CONSULT S.D.S. BEFORE USE